Course Schedules

COURSES 2018-01-03T11:02:32+00:00

Learning Center Class CALENDAR:

Register Here
Dec
3
Mon
2018
Surface Area, Porosity, Physical & Chemical Adsorption with applications in the ASAP 2020 and 3Flex 3500 @ MLC Training Center
Dec 3 @ 8:00 am – Dec 6 @ 3:00 pm

SYLLABUS

3Flex Combined P/C Operator Training

Click here to download full course details

INSTRUCTIONAL GOALS:

This course introduces students to the components, operation, and theory of the 3Flex
Physisorption & Chemisorption for surface area, porosity analysis, and active site characterization.
At the end of this course, you will:

  • Be able to properly weigh the sample tube with and without sample, determine the sample
    amount required, properly load a sample into a sample tube, determine required degas time
    and temperature, prepare the sample using the SmartPrep degas system, and introduce
    the sample to the instrument.
  • Understand the basic fundamentals of physisorption and basic operation of a volumetric
    analysis system.
  • Understand the basic fundamentals of chemisorption and the basic operation of a static
    analysis system.
  • Be able to use the computer and operational software to perform an analysis on a reference
    material.
  • Be able to properly configure any report format, a combination of reports, and obtain
    analysis information according to your laboratory requirements.
  • Be able to make all user level repairs, adjustments and checks, and locate equipment
    problems using the Troubleshooting section of the Operator’s manual.

 

NEEDS AND RESOURCES

Required Background
To successfully complete this course, you must:

  • Have some minimal exposure to a 3Flex 3500 in a laboratory environment.
  • Have reviewed the Operator’s manual.

Required Materials
The following provided materials will help you successfully complete this course:

  • Operator Training Study Guide with Lecture Presentations
  • Notepad
  • Pen
  • Highlighter
  • Micromeritics Thumb Drive

Additional Print Resources
The following publications will also be provided:

  • Webb, Paul A. and Clyde Orr. Analytical Methods in Fine Particle Technology. Norcross, Georgia,
    U.S.A.: Micromeritics Instrument Corporation, 1997.
  • Related Application Notes and Technical Tips.
Dec
7
Fri
2018
ASAP 2020C and 3Flex 3500 Advanced II @ MLC Training Center
Dec 7 @ 8:00 am – 2:00 pm

SYLLABUS

3Flex 3500 Physisorption Advanced Operator Training

Click here to download full course details

INSTRUCTIONAL GOALS:

This course introduces students to advanced theory of the 3Flex 3500 for surface area
and porosity analysis.

 

NEEDS AND RESOURCES

Required Background
To successfully complete this course, you must:

  • Have some minimal exposure to Physisorption Theory.

Additional Print Resources
The following publications will also be provided:

  • Webb, Paul A. and Clyde Orr. Analytical Methods in Fine Particle Technology. Norcross, Georgia,
    U.S.A.: Micromeritics Instrument Corporation, 1997.
  • Related Lectures, Application Notes and Technical Tips.
Jan
8
Tue
2019
Gemini VII 2390 @ MLC Training Center
Jan 8 @ 8:00 am – Jan 9 @ 3:00 pm

 

SYLLABUS

Gemini VII Operator Training

Click here to download full course details

INSTRUCTIONAL GOALS:

This course introduces students to the components, operation, and theory of the Gemini
VII for surface area and porosity analysis.

At the end of this course, you will:

  • Be able to identify and power up the system, including installation of the operating
    program.
  • Be able to properly weigh the sample tube with and without sample, determine sample
    amount required, properly load a sample into a sample tube, determine required degas
    time and temperature, prepare the sample using the FlowPrep and/or VacPrep degas
    system, and introduce the sample preparation to the Gemini.
  • Understand the basic fundamentals of physisorption and basic operation of a volumetric
    analysis system.
  • Be able to use the computer and operational software to perform an analysis on a
    reference material.
  • Be able to properly configure any report format, a combination of reports, and obtain
    analysis information according to your laboratory requirements.
  • Be able to make all user level repairs, adjustments and checks, and locate equipment
    problems using the Troubleshooting section of the Operator’s manual.

NEEDS AND RESOURCES:

Required Background
To successfully complete this course, you must:

  • Have some minimal exposure to a Gemini in a laboratory environment.
  • Have reviewed the Operator’s manual.

Required Materials
The following provided materials will help you successfully complete this course:

  • Operator Training Study Guide with Lecture Presentations
  • Notepad
  • Pen
  • Highlighter
  • Micromeritics Thumb Drive

Additional Print Resources
The following publications will also be provided:

  • Webb, Paul A. and Clyde Orr. Analytical Methods in Fine Particle Technology. Norcross, Georgia,
    U.S.A.: Micromeritics Instrument Corporation, 1997.
  • Related Application Notes and Technical Tips.

Click Here to Register for this Course

Feb
4
Mon
2019
AutoChem II 2920 Basic Operator Training @ MLC Training Center
Feb 4 @ 8:00 am – Feb 6 @ 3:15 pm

SYLLABUS

AutoChem II 2920 Operator Training

Click here to download full course details

 

INSTRUCTIONAL GOALS:

This course introduces students to the components, operation, and theory of the
AutoChem II for surface area and porosity analysis.
At the end of this course, you will:

  • Be able to identify and power up the system, including installation of the operating
    program.
  • Be able to properly weigh the sample tube with and without sample, determine
    sample amount required and properly load a sample into the Instrument.
  • Understand the basic fundamentals of chemisorption and the basic operation of a
    dynamic (flowing gas) analysis system.
  • Be able to use the computer and operational software to perform an analysis on a
    reference material.
  • Be able to properly configure a report format, overlay sample data, and obtain
    analysis information according to your laboratory requirements.
  • Be able to make all user level repairs, adjustments and checks, and locate
    equipment problems using the Troubleshooting section of the Operator’s manual.

 

NEEDS AND RESOURCES:

Required Background
To successfully complete this course, you must:

  • Have some minimal exposure to an AutoChem II in a laboratory environment.
  • Have reviewed the Operator’s manual.

Required Materials
The following provided materials will help you successfully complete this course:

  • Laboratory Practical Exercise Guide with Lecture Presentations
  • Notepad, Pen and Highlighter
  • Micromeritics Thumb Drive

Additional Print Resources
The following publications will also be provided:

  • Webb, Paul A. and Clyde Orr. Analytical Methods in Fine Particle Technology. Norcross, Georgia,
    U.S.A.: Micromeritics Instrument Corporation, 1997.
  • Related Application Notes and Technical Tips.

 

Click Here to Register for This Course

Feb
7
Thu
2019
AutoChem II 2920 Advanced II Training @ MLC Training Center
Feb 7 @ 8:30 am – Feb 8 @ 4:30 pm

 

SYLLABUS

AutoChem II 2920 Advanced Operator Training

Click here to download full course details

 

INSTRUCTIONAL GOALS:

This course introduces students to advanced chemisorption theory, applications and
ASAP 2920 use with a Mass Spectrometer.

 

NEEDS AND RESOURCES:

Required Background
To successfully complete this course, you must:

  • Have regular exposure to an AutoChem II in a laboratory environment, or
  • Have completed the AutoChem II Standard Operators Training Course.

Additional Print Resources
The following publications will also be provided:

  • Webb, Paul A. and Clyde Orr. Analytical Methods in Fine Particle Technology. Norcross, Georgia,
    U.S.A.: Micromeritics Instrument Corporation, 1997.
  • Related Application Notes and Technical Tips.

 

Click Here to Register for This Course